Craft-N-Spin Easel - used in conjunction with the Painter's Pyramids (952410017)

 

The Craft-N-Spin™ is approximately 16" in diameter and 3.5" tall. Weighing approximately 3lbs, the Craft-N-Spin stores easily and is made of a specially formulated, lightweight plastic that provides superior strength and adhesion resistance.

The Craft-N-Spin™ supports projects weighing up to 100lbs.

• No more touching wet paint. Touch-free access to all sides of your project eliminates contact with wet surfaces.

• Stop waiting for the paint to dry. Paint the bottom first then place project on Craft-N-Spin to access all other sides.

• Achieve a smooth, consistent look. Projects will look cleaner and colors more consistent when you complete them in one sitting.

• Acrylics -Oil and watercolor painting
• Sign making -Fabric and glass painting
• Spray painting -Pottery and ceramics
• Airbrushing -Decoupage and paper mache
• -axidermy -Cake decorating
• Mosaics -Leather working and branding
• Metalwork -Frame decorating
• Wood crafts -Wood burning

The Craft-N-Spin™ combines the elegant simplicity of the Painter's Pyramid with the versatility of a turntable. The 12 Painter's Pyramids® are mounted to the turntable surface on rails to allow tremendous flexibility in supporting finishing projects; Simply slide the Painter's Pyramids® along the rails to fit your project The Craft-N-Spin™ is capable of supporting projects that weigh up to 100lbs.

The Painter's Pyramids are made of a high density polymer to which common paints and adhesives won't stick. The tiny points at the top of each pyramid minimize touch points on your project allowing for an almost flawless final product.

1. Place the Craft-N-Spin on a stable and even surface.
2. Adjust the pyramids by sliding them along the rails until they are located under the bottom of your project.
3. Carefully place your project on the Craft-N-Spin; If your project is large, be sure that it is centered on the turntable.
4. Lightly shake your project to ensure that it is stable on the supports.
5. Slowly and gently spin the turntable during use.
6. Carefully remove your project from the Craft-N-Spin after completion and appropriate drying time.

1. Turn the Craft-N-Spin upside down.
2. Remove the screw in the center of the turntable.
3. Lift the bottom section of the Craft-N-Spin off the assembly.
4.  As required, remove 1 or more of the 6 screws that secure the arms to the top surface of the table.

Shipping Weight: 4  lbs.