|
DecoArt Texture Fierro Paint 10 oz. (TXF01 - TXF09)
Product Description:
 Fierro is an exciting new product just in time for the latest home decor looks. "Fierro" in the romance languages means "iron". DecoArt has developed this elegant, subtle texture combined with glistening metallic flakes to be used on a wide variety of surfaces in your home. Use Texture Fierro to create the appearance of high-end, gallery quality picture frames, contemporary art and more
Painting Surfaces:
Canvas
Ceramic bisque
Foam core
MDF
Metal
Papier mache
Terra cotta
Wall board
Wood
Features and Advantages:
|
Excellent coverage in one coat
Highly pigmented
Rich colors with metallic flakes
Easy to apply
Excellent adhesion qualities
No prep required on most surfaces-no need to fill nail holes or sand the surface
Intermixable
Dries to a hard finish
Can be glazed
Easily manipulated with Texture Tools
Non-toxic
Soap and water clean-up when wet
|
Basic Instructions:
|
Open the jar, remove protective seal, dip tool into the jar and apply using desired technique. Let dry.
Wash tools and clean work area immediately after use.
Close lid tightly when not in use to prolong shelf life.
|
|
Tools for application:
|
Palette knife
Brush
Sponge
Texture tools
|
|
Appearance:
|
Wet: smooth, creamy paste with fine grit and metallic flakes
Dry: fine sand-like texture, dries hard, low-sheen finish with glistening metallic flakes
|
|
Techniques/Typical Uses:
Use palette knife, scruffy brush or sponge to peak: Dab tool into wet Fierro. Press down and immediately lift straight up. Repeat with a pouncing motion until desired effect is achieved.
Use stencils to create relief designs: Position stencil on surface. Tape or hold stencil with fingers to secure. Use palette knife to spread Fierro over open stencil area. Carefully lift stencil. Let dry.
Combing: Use Texture Tools to achieve a variety of designs. Apply Fierro on project surface. Use straight side of Texture Tool to smooth out. Choose Texture Tool shape as desired. Drag tool through wet Fierro. Circles are formed by using one side of the tool as a pivot-just sweep tool around in a complete circle. Waves, zig-zags and more are done by moving the tool from side to side as it is dragged through the wet Fierro. Stripes and a woven look are easily accomplished by dragging the tool in straight or diagonal lines. Wipe tool on paper towel or cloth after each pass to assure clean images.
A smoother, more uniform look can be achieved by applying Fierro with a palette knife and smoothing out with the flat side of a Texture Tool .
Antiquing Methods: Fierro may be glazed with Elegant Finish Glazes or your own mix. To make a glaze, mix equal parts water and DecoArt Faux Glazing Medium with up to 35% Americana Acrylic color of your choice. Once your project is dry, brush glaze over surface. Immediately wipe excess glaze from surface with a soft cloth. For a more subtle appearance, dampen the cloth before wiping back.
Part #
|
Name
|
Color
|
10-oz.
|
TXF01
|
Red Iron Oxide
|
|
$ 9.99
|
TXF02
|
Iron Brown
|
|
$ 9.99
|
TXF04
|
Iron Green
|
|
$ 9.99
|
TXF05
|
Midnight Blue Iron
|
|
$ 9.99
|
TXF06
|
Iron Graphite
|
|
$ 9.99
|
TXF07
|
Iron Black
|
|
$ 9.99
|
TXF08
|
Green Gold
|
|
$ 9.99
|
TXF09
|
Gold
|
|
$ 9.99 |
|
